Forwarded from Vehicles 3D Model
#3D_Model #Attack #FD3S #Mazda #RX_7 #Time
Mazda RX-7 FD3S Time Attack – 3D Model
Formats: MAX, FBX, OBJ, TEX
Mazda RX-7 FD3S is a sports car that was produced by Mazda from 1991 to 2002. It is the third generation of the RX-7 and is known for its sleek design, powerful rotary engine, and agile handling. RX-7 FD3S is powered by a 1.3-liter twin-turbocharged Wankel engine that produces 255 horsepower and 217 lb-ft of torque. It is paired with a five-speed manual transmission or a four-speed automatic transmission. The RX-7 FD3S can accelerate from 0 to 60 mph in 5.3 seconds and has a top speed of 165 mph. RX-7 FD3S has a sleek and aerodynamic design that is distinguished by its pop-up headlights, curved bodywork, and large rear wing. The interior is also well-appointed, with leather upholstery, wood trim, and a host of features, including a power-operated sunroof, a Bose sound system, and a navigation system.
The RX-7 FD3S is a popular choice for track enthusiasts and car collectors. It is known for its
Mazda RX-7 FD3S Time Attack – 3D Model
Formats: MAX, FBX, OBJ, TEX
Mazda RX-7 FD3S is a sports car that was produced by Mazda from 1991 to 2002. It is the third generation of the RX-7 and is known for its sleek design, powerful rotary engine, and agile handling. RX-7 FD3S is powered by a 1.3-liter twin-turbocharged Wankel engine that produces 255 horsepower and 217 lb-ft of torque. It is paired with a five-speed manual transmission or a four-speed automatic transmission. The RX-7 FD3S can accelerate from 0 to 60 mph in 5.3 seconds and has a top speed of 165 mph. RX-7 FD3S has a sleek and aerodynamic design that is distinguished by its pop-up headlights, curved bodywork, and large rear wing. The interior is also well-appointed, with leather upholstery, wood trim, and a host of features, including a power-operated sunroof, a Bose sound system, and a navigation system.
The RX-7 FD3S is a popular choice for track enthusiasts and car collectors. It is known for its
👍3😢3👏1
Forwarded from Vehicles 3D Model
#3D_Model #85 #T_34 #Tank
T-34-85 Tank – 3D Model
Formats: MAX, FBX, OBJ, TEX
T-34-85 medium tank was a major upgrade of the T-34 medium tank, which was the most widely produced tank in World War II. The T-34-85 was introduced in 1943 and quickly became the standard medium tank of the Red Army. T-34-85 was equipped with a new 85mm gun, which was significantly more powerful than the 76.2mm gun of the T-34. The new gun allowed the T-34-85 to penetrate the armor of German tanks at long ranges. The T-34-85 also had a number of other improvements over the T-34, including a larger turret, a more powerful engine, and improved armor protection. T-34-85 was a major factor in the Soviet victory in World War II. The tank was effective against German tanks and provided the Red Army with a valuable advantage on the battlefield. T-34-85 was produced in large numbers, with over 34,000 units built. The tank was used by the Soviet Union, Poland, Czechoslovakia, and other countries after the war.
DOWNLOAD FILE
T-34-85 Tank – 3D Model
Formats: MAX, FBX, OBJ, TEX
T-34-85 medium tank was a major upgrade of the T-34 medium tank, which was the most widely produced tank in World War II. The T-34-85 was introduced in 1943 and quickly became the standard medium tank of the Red Army. T-34-85 was equipped with a new 85mm gun, which was significantly more powerful than the 76.2mm gun of the T-34. The new gun allowed the T-34-85 to penetrate the armor of German tanks at long ranges. The T-34-85 also had a number of other improvements over the T-34, including a larger turret, a more powerful engine, and improved armor protection. T-34-85 was a major factor in the Soviet victory in World War II. The tank was effective against German tanks and provided the Red Army with a valuable advantage on the battlefield. T-34-85 was produced in large numbers, with over 34,000 units built. The tank was used by the Soviet Union, Poland, Czechoslovakia, and other countries after the war.
DOWNLOAD FILE
👍5😢3❤1🔥1
Forwarded from Vehicles 3D Model
#3D_Model #Hawk #P40 #War #Warplane #WW2
P40 War Hawk WW2 Warplane — 3D Model
Formats: MAX, FBX, OBJ, TEX
P-40 Warhawk was a single-engine, single-seat, all-metal fighter aircraft that served with the United States Army Air Forces (USAAF) and several other Allied air forces in World War II. The P-40 was the United States’ most numerous fighter aircraft in the early years of the war, and it played a significant role in the defense of the Philippines, North Africa, and the Soviet Union. The P-40 was designed by Curtiss-Wright Corporation as a modification of the P-36 Hawk, which had been in production since 1934. The P-40 was powered by a 1,200 horsepower Allison V-1710 engine and was armed with six .50 caliber machine guns. The P-40 was a fast and maneuverable aircraft, but it was also relatively heavy, which limited its performance at high altitudes.
The P-40 was first deployed with the USAAF in 1940. The aircraft was initially used in the defense of the Philippines, where it was quickly outclassed by the
P40 War Hawk WW2 Warplane — 3D Model
Formats: MAX, FBX, OBJ, TEX
P-40 Warhawk was a single-engine, single-seat, all-metal fighter aircraft that served with the United States Army Air Forces (USAAF) and several other Allied air forces in World War II. The P-40 was the United States’ most numerous fighter aircraft in the early years of the war, and it played a significant role in the defense of the Philippines, North Africa, and the Soviet Union. The P-40 was designed by Curtiss-Wright Corporation as a modification of the P-36 Hawk, which had been in production since 1934. The P-40 was powered by a 1,200 horsepower Allison V-1710 engine and was armed with six .50 caliber machine guns. The P-40 was a fast and maneuverable aircraft, but it was also relatively heavy, which limited its performance at high altitudes.
The P-40 was first deployed with the USAAF in 1940. The aircraft was initially used in the defense of the Philippines, where it was quickly outclassed by the
👍2😢2
Forwarded from Vehicles 3D Model
#3D_Model #M4A1 #Sherman #Tank #WarDaddy #WW2
Sherman M4A1 Tank WarDaddy WW2 – 3D Model
Formats: MAX, FBX, OBJ, TEX
The M4 Sherman was a medium tank that was produced by the United States during World War II. It was the most widely produced tank of the war, with over 49,000 units built. The Sherman was used by the United States, the United Kingdom, the Soviet Union, and other Allied countries. Sherman was a versatile tank that could be used in a variety of roles, including infantry support, tank-on-tank combat, and reconnaissance. It was armed with a 75-mm main gun and a .50-caliber machine gun. The Sherman was also equipped with a coaxial .30-caliber machine gun. The Sherman was a reliable and effective tank, but it was not without its flaws. It was vulnerable to the German 88-mm anti-tank gun, and it had a relatively thin armor. However, the Sherman’s production numbers and versatility made it a valuable asset to the Allied war effort. M4 Sherman was produced in a number of variants, including the M4A1,
Sherman M4A1 Tank WarDaddy WW2 – 3D Model
Formats: MAX, FBX, OBJ, TEX
The M4 Sherman was a medium tank that was produced by the United States during World War II. It was the most widely produced tank of the war, with over 49,000 units built. The Sherman was used by the United States, the United Kingdom, the Soviet Union, and other Allied countries. Sherman was a versatile tank that could be used in a variety of roles, including infantry support, tank-on-tank combat, and reconnaissance. It was armed with a 75-mm main gun and a .50-caliber machine gun. The Sherman was also equipped with a coaxial .30-caliber machine gun. The Sherman was a reliable and effective tank, but it was not without its flaws. It was vulnerable to the German 88-mm anti-tank gun, and it had a relatively thin armor. However, the Sherman’s production numbers and versatility made it a valuable asset to the Allied war effort. M4 Sherman was produced in a number of variants, including the M4A1,
😢2😱1
Forwarded from Vehicles 3D Model
#3D_Model #Alvis #APC #Light #Stormer
Alvis Stormer Light APC – 3D Model
Formats: MAX, FBX, OBJ, TEX
Alvis Stormer Light APC is a British-made armored personnel carrier (APC) based on the chassis of the Alvis FV432. It was designed to carry up to 8 fully-equipped soldiers and provide them with protection from small arms fire and artillery shrapnel. Stormer was first introduced in the 1980s and has been in service with the British Army ever since. It has also been exported to a number of other countries, including Australia, Finland, and Saudi Arabia. The Stormer is powered by a Perkins T6.3544 6-cylinder diesel engine that produces 300 horsepower. It has a top speed of 56 mph and a range of 250 miles. Stormer is equipped with a variety of weapons and systems, including a 7.62mm machine gun, a TOW missile launcher, and a smoke grenade launcher. It can also be fitted with a variety of other weapons and systems, depending on the mission requirements. Stormer has been used in a number of conflicts, including
Alvis Stormer Light APC – 3D Model
Formats: MAX, FBX, OBJ, TEX
Alvis Stormer Light APC is a British-made armored personnel carrier (APC) based on the chassis of the Alvis FV432. It was designed to carry up to 8 fully-equipped soldiers and provide them with protection from small arms fire and artillery shrapnel. Stormer was first introduced in the 1980s and has been in service with the British Army ever since. It has also been exported to a number of other countries, including Australia, Finland, and Saudi Arabia. The Stormer is powered by a Perkins T6.3544 6-cylinder diesel engine that produces 300 horsepower. It has a top speed of 56 mph and a range of 250 miles. Stormer is equipped with a variety of weapons and systems, including a 7.62mm machine gun, a TOW missile launcher, and a smoke grenade launcher. It can also be fitted with a variety of other weapons and systems, depending on the mission requirements. Stormer has been used in a number of conflicts, including
😢3👍2❤1
Forwarded from Vehicles 3D Model
#3D_Model #Fishing #Refrigerator #Ship #Trawler
Fishing Trawler Refrigerator Ship – 3D Model
Formats: MAX, FBX, OBJ, TEX
Small-sized fishing trawlers refrigerator type Baltika (project 1328) — a series of small fishing trawlers forage trawling. They were built from the beginning of the 1970s in the USSR, Romania and Russia (since 1991). A total of about 400 ships were built. Designed for fishing with a trawl in the open sea with maximum distance from the shelter to 100 miles, the ability to pre-process fish (cooling, ambassador) and handing it over to shore receiving points.
DOWNLOAD FILE
Fishing Trawler Refrigerator Ship – 3D Model
Formats: MAX, FBX, OBJ, TEX
Small-sized fishing trawlers refrigerator type Baltika (project 1328) — a series of small fishing trawlers forage trawling. They were built from the beginning of the 1970s in the USSR, Romania and Russia (since 1991). A total of about 400 ships were built. Designed for fishing with a trawl in the open sea with maximum distance from the shelter to 100 miles, the ability to pre-process fish (cooling, ambassador) and handing it over to shore receiving points.
DOWNLOAD FILE
😢4👍2
Forwarded from Vehicles 3D Model
#3D_Model #631 #Hydrolane #Latecoere
Latecoere 631 Hydrolane – 3D Model
Formats: MAX, FBX, OBJ, TEX
Latecoere 631 Hydrolane was a French flying boat that was designed and built by Latecoere. It was the largest flying boat in the world when it first flew in 1931. 631 was powered by four 1,000-horsepower Gnome-Rhône 14N-48 radial engines. It had a top speed of 200 mph and a range of 2,000 miles. The 631 was designed to be a long-range passenger and cargo aircraft. It could carry up to 12 passengers or 10 tons of cargo. The 631 was also used for a variety of other purposes, including maritime patrol, reconnaissance, and ambulance service.
The 631 was a successful aircraft and was used by a number of airlines and military forces. It was eventually replaced by the larger and more powerful Latecoere 631R in the late 1930s. Latecoere 631 was a significant aircraft in the history of flying boats. It was the largest flying boat in the world when it first flew and was used by a number of airlines and military
Latecoere 631 Hydrolane – 3D Model
Formats: MAX, FBX, OBJ, TEX
Latecoere 631 Hydrolane was a French flying boat that was designed and built by Latecoere. It was the largest flying boat in the world when it first flew in 1931. 631 was powered by four 1,000-horsepower Gnome-Rhône 14N-48 radial engines. It had a top speed of 200 mph and a range of 2,000 miles. The 631 was designed to be a long-range passenger and cargo aircraft. It could carry up to 12 passengers or 10 tons of cargo. The 631 was also used for a variety of other purposes, including maritime patrol, reconnaissance, and ambulance service.
The 631 was a successful aircraft and was used by a number of airlines and military forces. It was eventually replaced by the larger and more powerful Latecoere 631R in the late 1930s. Latecoere 631 was a significant aircraft in the history of flying boats. It was the largest flying boat in the world when it first flew and was used by a number of airlines and military
👍4😢2❤1
Forwarded from Vehicles 3D Model
#2S35 #3D_Model #Koalitsiya #SV
2S35 Koalitsiya SV – 3D Model
Formats: MAX, FBX, OBJ, TEX
2S35 Koalitsiya-SV is a Russian 152-mm self-propelled howitzer (SPH) developed by Uraltransmash. It was first shown to the public in 2015. Koalitsiya-SV is a highly advanced SPH that is designed to provide the Russian Army with a significant increase in firepower and mobility. It is equipped with a 152-mm 2A88 gun that has a maximum range of 70 kilometers. The gun can fire a variety of ammunition, including conventional, guided, and nuclear rounds. Koalitsiya-SV is also equipped with a number of advanced features that make it more survivable and effective on the battlefield. It has a modular armor system that can be configured to meet the specific needs of the mission. It is also equipped with a fire suppression system and an active protection system. The Koalitsiya-SV is a significant upgrade over the previous generation of Russian SPHs. It is a more powerful, mobile, and survivable weapon that will give the Russian
2S35 Koalitsiya SV – 3D Model
Formats: MAX, FBX, OBJ, TEX
2S35 Koalitsiya-SV is a Russian 152-mm self-propelled howitzer (SPH) developed by Uraltransmash. It was first shown to the public in 2015. Koalitsiya-SV is a highly advanced SPH that is designed to provide the Russian Army with a significant increase in firepower and mobility. It is equipped with a 152-mm 2A88 gun that has a maximum range of 70 kilometers. The gun can fire a variety of ammunition, including conventional, guided, and nuclear rounds. Koalitsiya-SV is also equipped with a number of advanced features that make it more survivable and effective on the battlefield. It has a modular armor system that can be configured to meet the specific needs of the mission. It is also equipped with a fire suppression system and an active protection system. The Koalitsiya-SV is a significant upgrade over the previous generation of Russian SPHs. It is a more powerful, mobile, and survivable weapon that will give the Russian
👍2😢2❤1🔥1🤩1
Forwarded from Vehicles 3D Model
#3D_Model #Concept #Fighting #Infantry #Jericho #Vehicle
Infantry Fighting Vehicle Jericho Concept — 3D Model
Formats: MAX, FBX, OBJ
Infantry Fighting Vehicle Jericho Concept is a futuristic infantry fighting vehicle (IFV) that was developed by the Israeli defense company Elbit Systems. It was first unveiled in 2019. ericho Concept is designed to provide a high level of protection for its crew and passengers, while also being highly mobile and capable of carrying a variety of weapons and systems. The vehicle is powered by a hybrid electric drive system that provides a top speed of over 60 mph. It is also equipped with a number of advanced technologies, including a networked combat management system, a laser-based active protection system, and a remotely operated weapon station. Jericho Concept is designed to be modular, so it can be configured to meet the specific needs of different users. For example, it can be equipped with a variety of weapons, including a 30mm cannon, a 7.62mm machine gun, or a missile
Infantry Fighting Vehicle Jericho Concept — 3D Model
Formats: MAX, FBX, OBJ
Infantry Fighting Vehicle Jericho Concept is a futuristic infantry fighting vehicle (IFV) that was developed by the Israeli defense company Elbit Systems. It was first unveiled in 2019. ericho Concept is designed to provide a high level of protection for its crew and passengers, while also being highly mobile and capable of carrying a variety of weapons and systems. The vehicle is powered by a hybrid electric drive system that provides a top speed of over 60 mph. It is also equipped with a number of advanced technologies, including a networked combat management system, a laser-based active protection system, and a remotely operated weapon station. Jericho Concept is designed to be modular, so it can be configured to meet the specific needs of different users. For example, it can be equipped with a variety of weapons, including a 30mm cannon, a 7.62mm machine gun, or a missile
😱2😢2🔥1🤔1
Forwarded from Vehicles 3D Model
#3D_Model #Tank #Wagon
Tank Wagon – 3D Model
Formats: MAX, FBX, OBJ, TEX
A tank wagon, also known as a tank car, is a type of railroad car or rolling stock designed to transport liquid and gaseous commodities. Tank wagons are used to transport a wide variety of products. Tank wagons are typically made of steel or aluminum. The tank is usually made of a single piece of metal that is welded or riveted together. The tank is then insulated to protect the contents from the elements and to prevent the contents from becoming too hot or too cold. Tank wagons are an essential part of the transportation industry. They are used to transport a wide variety of products, both domestically and internationally.
DOWNLOAD FILE
Tank Wagon – 3D Model
Formats: MAX, FBX, OBJ, TEX
A tank wagon, also known as a tank car, is a type of railroad car or rolling stock designed to transport liquid and gaseous commodities. Tank wagons are used to transport a wide variety of products. Tank wagons are typically made of steel or aluminum. The tank is usually made of a single piece of metal that is welded or riveted together. The tank is then insulated to protect the contents from the elements and to prevent the contents from becoming too hot or too cold. Tank wagons are an essential part of the transportation industry. They are used to transport a wide variety of products, both domestically and internationally.
DOWNLOAD FILE
👍4😢3
F-22C Raptor II – 3D Model
3DS | OBJ | FBX | TEX
https://desirefx.me/3d_models/f-22c-raptor-ii-3d-model/
3DS | OBJ | FBX | TEX
https://desirefx.me/3d_models/f-22c-raptor-ii-3d-model/
❤3
American Peterbilt Truck
MAX | FBX | OBJ | TEX
https://desirefx.me/3d_models/american-peterbilt-truck/
MAX | FBX | OBJ | TEX
https://desirefx.me/3d_models/american-peterbilt-truck/
👍10😱2