👉Chapter 2👇

https://youtu.be/A5pZaVj7JFw

👉Complete Guide to Reading Building Drawings

📐መፅሃፉ የህንፃን ድሮዊንግ በተግባር ለመረዳት እና ስለ ጠቅላላ አርክቴክቸር ሳይነስ የሚዳስስ ምርጥ መፅሐፍ ከታች ባለው ሊንክ ያውሩዱት👇

https://ye-buna.com/etconp?ref=product_detail&product=6aa7c4a30b34d_etconp

#ADVERTISEMENT

INTRODUCE A CUSTOMER. EARN A COMMISSION!

ደንበኛ ያስተዋውቁ፣ ኮሚሽን ያግኙ!

WELCOME TO SUNSPACE FINISHING MATERIALS!

✨ BETTER QUALITY. LOWER PRICES.
✨ የተሻለ ጥራት፣ በተሻለ ዋጋ!

✨ OUR PRODUCTS | የምርት ዓይነቶቻችን

🛁 Bathroom Solutions (WC Set, Shower Panel, Heaters & Accessories)

✨ Ceramics and Porcelain

🔧 PPR Pipes & Fittings

🏠 Granite (Staircase & Kitchen Tops)

💧 Construction Chemicals & Waterproofing Products

📍 VISIT US: Signal Shopping Centre, 1st Floor.

📞 CALL US: 09 11 51 87 40

🤝 SUNSPACE TRADING — LET’S GROW TOGETHER!

#finishing materials #construction materials

🏗️Slump Test (የስለምፕ ሙከራ)

🏛የኮንክሪት ጥራትን ለመቆጣጠር የሚረዳ አስፈላጊ ምርመራ!

🚥በግንባታ ሳይት ላይ ኮንክሪት ከመፍሰሱ በፊት ከሚደረጉ አስፈላጊ ምርመራዎች አንዱ Slump Test ነው።

🌟ግን ይህ ፈተና ለምን ይደረጋል?

🔹 Slump Test ምንድን ነው?

በቀላሉ ሲታይ፣ አዲስ የተቀላቀለ ኮንክሪት ለመዘርጋት፣ ለማፍሰስና በቦታው ላይ በትክክል ለማስቀመጥ ምን ያህል ምቹ እንደሆነ (Workability) ለመፈተሽ የሚያገለግል ዘዴ ነው።

🔹 እንዴት ይከናወናል?

መጀመሪያ ኮንክሪቱን Slump Cone በሚባለው የኮን ቅርጽ መሣሪያ ውስጥ በሶስት ንብርብሮች እንሞላለን። እያንዳንዱን ንብርብር በተገቢው መንገድ ከጠመቅን በኋላ ኮኑን ቀስ ብለን እናነሳለን።

ከዚያም ኮንክሪቱ ምን ያህል ወደ ታች እንደተቀመጠ በመለካት የSlump መጠኑን እናውቃለን።

🔹 ለምን አስፈላጊ ነው?

- ኮንክሪቱ ለሚሰራው ስራ ተስማሚ መሆኑን ለማወቅ።
- የኮንክሪቱን ውህደትና የመሥራት ቀላልነት ለመገምገም።
- በኮንክሪት ስራ ወቅት የጥራት ቁጥጥርን ለማጠናከር።

⚠️ ለማስታወስ፦ Slump Test ብቻውን የኮንክሪትን ጥንካሬ አይወስንም ስለዚህ የኮንክሪት ጥንካሬን ለማረጋገጥ እንደ Compressive Strength Test ያሉ ተጨማሪ ምርመራዎች ያስፈልጋሉ።

━━━━━━━━━━━━━━​​
🌐ለተጨማሪ መረጃ እና ሌሎች የኮንስትራክሽን ዘርፍ ዜናዎች የ YouTube ገፃችን ከታች ባለው ሊንክ በመግባት SubScribe አርገው ቤተሰብ ይሁኑ👇

https://youtube.com/@ethiopianconstruction7?si=ils307xXQQpIdCwG
‎
‎@etconp

👉ከስራ ፍለጋ ወደ ራስዎ ንግድ ባለቤትነት 🚀

🌟ምርጥ ቢዝነስ ፕላን Sample አዘጋጅተንላቹዋል

📘 የሚያገኟቸው 3 የቢዝነስ ፕላን ናሙናዎች፦

1️⃣ HCB (Hollow Concrete Block) ማምረቻ
2️⃣ የሲሚንቶ ጡብ (Cement-Based Brick) ማምረቻ
3️⃣ የሲሚንቶ ንጣፍ (Cement Tile) ማምረቻ

🎯 ይህ ዲጂታል ፓኬጅ ለማን ይጠቅማል?

✅ አዲስ ለተመረቁ የሲቪል ኢንጂነሪንግ ተማሪዎች
✅ ለኮንስትራክሽን ባለሙያዎች
✅ የራሳቸውን ንግድ መጀመር ለሚፈልጉ ሥራ ፈጣሪዎች
✅ ለኢንቨስተሮችና ለንግድ አስተዳደር ፍላጎት ላላቸው

🔥እነዚህ የቢዝነስ ፕላን ናሙናዎች Editable በመሆናቸው እንደፍላጎትዎ ማስተካከል ይችላሉ እንዲሁም Market Study፣ Financial Analysis፣ Plant Capacity እና Technology የመሳሰሉ ዋና ዋና ይዘቶችን ያካትታሉ።

💫እነዚህ ፋይሎች ከፈለጉ ከታች ባለው ሊንክ ያውርድዋቸው👇

https://ye-buna.com/etconp?ref=product_detail&product=6ae9a3e225e11_etconp

🏗️ TYPES OF CONCRETE MIX

Concrete is made from cement, sand, coarse aggregate and water.

1. Main Components

- Cement – Binding material.
- Sand – Fine aggregate.
- Gravel – Coarse aggregate.
- Water – Activates cement hydration.

2. Three Common Mix Types

1. Lean Mix: 1:5:10 – Used for blinding, sub-bases and non-structural works.
2. Standard Mix: 1:2:4 – Used for slabs, beams, columns and foundations.
3. Rich Mix: 1:1.5:3 – Used for heavy structures and precast elements.

3. Important Considerations

- Use clean, well-graded materials.
- Maintain the correct water-cement ratio.
- Ensure proper mixing and compaction.
- Provide adequate curing.
- Follow approved concrete mix designs.

📌 Note: Mix ratios are approximate volume proportions. Actual strength depends on materials, water content, workmanship and mix design.

@etconp

🏗️ LABOUR PRODUCTIVITY IN CONSTRUCTION

Labour productivity is the amount of construction work completed by a worker or team per day.

1. Daily Work Output

1. Brickwork – 1 mason: 1.25 m³/day.
2. Plastering – 1 mason: 10 m²/day.
3. Tile Work – 1 mason + 1 helper: 8–10 m²/day.
4. Blockwork – 1 mason: 8 m²/day.
5. Formwork – 1 carpenter + 1 helper: 8–12 m²/day.
6. Reinforcement – 1 skilled worker + 1 helper: 1–1.5 tonnes/day.

2. Importance of Labour Productivity

- Labour cost estimation.
- Project scheduling.
- Manpower planning.
- Site performance monitoring.
- Improving construction efficiency.

👉ለ ኳንቲቲ ሰርቨይንግ እጅግ ጠቃሚ በተለይ Rate Analysis ስትሰሩ የሚያግዛቹ ስታንዳርዶች የያዘ መፅሃፍ ይፈልጋሉ?

🔆ስለ labour እና equipment UF(Utilization Factor) ከዚህ በተጨማሪ የ labour,Equipment እና machinery composition standard ወይ norms ጨምሮ Material consumption rate standard ያካተተ መፅሀፍ ከፈለጉ ከታች ባለው ሊንክ ያውርዱ👇

https://ye-buna.com/etconp?ref=product_detail&product=6a7ab12995479_etconp

🏗️ MULTI-STOREY CONCRETE FRAME CONSTRUCTION
A multi-storey concrete frame consists of columns, beams, slabs and foundations that support building loads and provide structural stability.
1. Main Components
Crane – Lifts construction materials.
Concrete Columns – Transfer vertical loads.
RC Beams – Support floor slabs.
Beam-Column Connections – Join structural members.
Floor Slabs – Provide floor surfaces.
Steel Bracing – Resists lateral forces.
Bolts and Plates – Secure connections.
Work Platform – Provides elevated access.
Base Plates – Connect columns to foundations.
Foundations – Transfer loads to the soil.
Anchor Bolts – Secure column bases.
2. Key Engineering Principles
Proper load transfer.
Structural stability.
Strong connections.
Foundation safety.
Construction quality control.
Worker safety.
📌 Note: Final design and construction must follow applicable structural codes and engineering specifications.


@etconp