Meshcore / LORA experiment today. 47km from my house to a drone flying a repeater. My house antenna is 85ft above terrain, and the drone worked at 150-120ft up but not at 110ft.
According to the math, it should not have worked yet it did. There's terrain way inside the fresnel zone
For the non-radio people, 160mw (a little more than 1/8th of a watt had reliable communications for 30 miles. For comparison, most FRS radios are 2watts and "supposedly" go 5 miles but never do.
According to the math, it should not have worked yet it did. There's terrain way inside the fresnel zone
For the non-radio people, 160mw (a little more than 1/8th of a watt had reliable communications for 30 miles. For comparison, most FRS radios are 2watts and "supposedly" go 5 miles but never do.
π11π―2π1
I was petting the german shepherd today and our other outdoor dog got jealous. He tried several times to insert himself between me and the other dog, but I just kept petting the shepherd. The malinois did his thing where he forced his way between my legs and sat down. he put his head up and started scooching backwards, making me walk backwards away from the other dog. Such a smart boy.
π₯15π5β€βπ₯3π1
Build your own solar powered mesh repeater. $13 for the solar yard light, $35 for the RAK LORA module and a few bucks for an antenna. This guy added some sensors to it like baro pressure which you likely don't need.
https://www.homedepot.com/p/Hampton-Bay-120-Lumen-Black-LED-Weather-Resistant-Outdoor-Landscape-Solar-Spotlight-with-Color-Changing-and-Adjustable-Head-72302-003-New/334187536
https://www.homedepot.com/p/Hampton-Bay-120-Lumen-Black-LED-Weather-Resistant-Outdoor-Landscape-Solar-Spotlight-with-Color-Changing-and-Adjustable-Head-72302-003-New/334187536
β€6
This media is not supported in your browser
VIEW IN TELEGRAM
π₯27π10β€4
Adventure today.... Pump on a 5acre parcel we have tripped out the other day. I turned breaker back on and pump pulled 10amps, all normal. Today found it tripped again. This time it really tripped every time I turned it on. Isolated the 240v line at the pressure switch and it still tripped. So must be a problem with wire under ground. Fortunately we also had a 2nd set of wires run out there for 120v outlet in pump house. Switched that wire over to pump duty and we're off and running.
π6π5β€βπ₯1
Augered 6 holes in the ground today for the pole shed. The very first corner post hole shot off crooked. It means I may have ot move all posts over 1/2 a post width.... If I'm careful I can move the string lines over 2-3/4"and maintain the square layout we did the other day. Dug the holes for one side and poured a bag of concrete in the bottom to make a footer pad. Tomorrow I'll mock up a 6x6 post in that boogered up corner and see if I need to change where we auger the 6 holes on the other side of the building.
Nothing goes to plan.
Nothing goes to plan.
π’9π1
Off The Grid
I swear the sun looked bigger when I took this picture. Thinking of starting a new religion. We will be the weslatarians. Sun worshippers. House becomes a church for tax write off, enough food growing for our community. Even a cemetery on site.
You will have the safest property in your county. The local sheriff/police, the fbi, cia and all the other 3 letter agencies will be camped around your property......
π―19
Attempting something.... I've aquired two 21' 3" pipes and a 6ft 3" pipe. I've made them into an A frame and put a snatch block at the top. I'll mount an electric winch on the bottom with cable up thru the snatch block. The idea is to make a crane of sorts that I can hold up with the tractor loader and use the winch to hoist up the trusses for the pole barn.
It's gunna work or we're gunna rent a towable manlift.
It's gunna work or we're gunna rent a towable manlift.
π3π1
Neat idea... https://www.youtube.com/watch?v=FLme7ReYy30
YouTube
I've Been Waiting YEARS to Design This... It's Finally HERE!
- DOWNLOAD THE STL FILES HERE FOR FREE:
https://makerworld.com/en/models/3103712-100ah-lfp-mini-battery-topper-with-victron-mppt
- You can also download the STL files HERE:
https://drive.google.com/drive/folders/1JGH1asxlcD9YAXi540vX3U9AJByOPPga?usp=sharingβ¦
https://makerworld.com/en/models/3103712-100ah-lfp-mini-battery-topper-with-victron-mppt
- You can also download the STL files HERE:
https://drive.google.com/drive/folders/1JGH1asxlcD9YAXi540vX3U9AJByOPPga?usp=sharingβ¦
π₯6β€1β‘1π1
Forwarded from Ashton
Did my trench run through the forest today. Had no choice because of the way the path is eroded along the edge of the drill pad, and I didn't want to take down 20 hardwoods to back the path up. Because of where it's located against the fence, it'd be a nightmare to get dirt in there to backfill it.
The roots, man... what a total pain to dig this last stretch. But I'm gonna run a water line out into the forest from here and put a faucet on it to start irrigating my Live Oaks.
I'll finish this up on Sunday, get the lines in, and cover it all up. I think it'll be close to 1400' when done.
The roots, man... what a total pain to dig this last stretch. But I'm gonna run a water line out into the forest from here and put a faucet on it to start irrigating my Live Oaks.
I'll finish this up on Sunday, get the lines in, and cover it all up. I think it'll be close to 1400' when done.
π13β€4π3π2