How To Install Kali Nethunter in Termux
What is Kali Nethunter?
Kali Nethunter is a Android ROM which is designed for Penetration Testing with Android Devices, Firstly Nethunter is Available for Nexus And Oneplus Devices,
And it also used to perform wireless attacks such as WiFi Hacking etc.
Once it is Possible to use on Nexus Devices only, But now you can install in any Android Device without Rooting through Termux App.
How to install kali nethunter in termux Installing Kali Nethunter in Termux is very Easy, and It can be done by using few commands
Before Installing Kali Nethunter, You Must Satisfy Below Requirements
Requirements:
A fully Charged Device
Good Internet Connection
At least 1GB RAM & 2 GB Free Space
Termux App Must Be Installed
Xserver XSDL App must Be Installed
A little bit of Patience😇
kali nethunter-termux commands
Follow Below steps to install nethunter in android
Step1: Firstly Download and install Termux from Play store
Step2: Now Open Termux and type this Command
apt update && apt upgrade
Step3: Now Type this Command
curl -LO https://raw.githubusercontent.com/Hax4us/Nethunter-In-Termux/master/kalinethunter
Step4: Now Give Chmod Permission by entering this command
chmod +x kalinethunter
Step5: Now Type this Command to install all the Scripts that are required to install Nethunter
./kalinethunter
Step 5: Now You Have to execute this command to get started
startkali
Final Step: Now everything is OK, to get necessary keys, you must type this command
apt-key adv --keyserver hkp://keys.gnupg.net --recv-keys 7D8D0BF6
Must Type Below Command if you are installing for the first time
after startkali
execute this command
wget https://http.kali.org/kali/pool/main/k/kali-archive-keyring/kali-archive-keyring_2018.1_all.deb
Then
apt install ./kali-archive-keyring_2018.1_all.deb
Now you are ready to start using Kali Nethunter in Termux,
The Good News is You can Use Nethunter Graphical Interface Too
So
How To Use Graphical Interface?
If you're successfully installed Nethunter in Termux then follow below steps to use the graphical interface
Step 1: Firstly Open Termux then type this command
apt-get install lxde-core lxde kali-defaults kali-root-login desktop-base
This will take some time, so wait until everything is OK
Now install Xserver XSDL App from Play store
Then Download Additional Fonts (60MB), After download complete wait for some time, then open Nethunter and type this command
DISPLAY=127.0.0.1:0 PULSE_SERVER=tcp:127.0.0.1:4712 startlxde &
Now Open Xserver App to start using Kali Nethunter, That's it
Please Share and Support us t.me/Termux_For_Android
What is Kali Nethunter?
Kali Nethunter is a Android ROM which is designed for Penetration Testing with Android Devices, Firstly Nethunter is Available for Nexus And Oneplus Devices,
And it also used to perform wireless attacks such as WiFi Hacking etc.
Once it is Possible to use on Nexus Devices only, But now you can install in any Android Device without Rooting through Termux App.
How to install kali nethunter in termux Installing Kali Nethunter in Termux is very Easy, and It can be done by using few commands
Before Installing Kali Nethunter, You Must Satisfy Below Requirements
Requirements:
A fully Charged Device
Good Internet Connection
At least 1GB RAM & 2 GB Free Space
Termux App Must Be Installed
Xserver XSDL App must Be Installed
A little bit of Patience😇
kali nethunter-termux commands
Follow Below steps to install nethunter in android
Step1: Firstly Download and install Termux from Play store
Step2: Now Open Termux and type this Command
apt update && apt upgrade
Step3: Now Type this Command
curl -LO https://raw.githubusercontent.com/Hax4us/Nethunter-In-Termux/master/kalinethunter
Step4: Now Give Chmod Permission by entering this command
chmod +x kalinethunter
Step5: Now Type this Command to install all the Scripts that are required to install Nethunter
./kalinethunter
Step 5: Now You Have to execute this command to get started
startkali
Final Step: Now everything is OK, to get necessary keys, you must type this command
apt-key adv --keyserver hkp://keys.gnupg.net --recv-keys 7D8D0BF6
Must Type Below Command if you are installing for the first time
after startkali
execute this command
wget https://http.kali.org/kali/pool/main/k/kali-archive-keyring/kali-archive-keyring_2018.1_all.deb
Then
apt install ./kali-archive-keyring_2018.1_all.deb
Now you are ready to start using Kali Nethunter in Termux,
The Good News is You can Use Nethunter Graphical Interface Too
So
How To Use Graphical Interface?
If you're successfully installed Nethunter in Termux then follow below steps to use the graphical interface
Step 1: Firstly Open Termux then type this command
apt-get install lxde-core lxde kali-defaults kali-root-login desktop-base
This will take some time, so wait until everything is OK
Now install Xserver XSDL App from Play store
Then Download Additional Fonts (60MB), After download complete wait for some time, then open Nethunter and type this command
DISPLAY=127.0.0.1:0 PULSE_SERVER=tcp:127.0.0.1:4712 startlxde &
Now Open Xserver App to start using Kali Nethunter, That's it
Please Share and Support us t.me/Termux_For_Android
Telegram
Termux Hackers (Users)
╔╦╦╦═╦╗╔═╦═╦══╦═╗
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
║║║║╩╣╚╣═╣║║║║║╩╣
╚══╩═╩═╩═╩═╩╩╩╩═╝
Use This bot to contact with us
@Bot_Nospam_Bot
Check This bot @TermuxForAndroidBot
Termux Hackers (Users)
Zphisher is an Automated Phishing Tool for different types of phishing attacks.
How to Install
Open the terminal and type following commands.
Open the terminal and type following commands.
apt update && apt upgradeapt install gitgit clone git://github.com/htr-tech/zphisher.gitcd zphisherbash zphisher.shHow to install th3inspector tool
git clone https://github.com/Moham3dRiahi/Th3inspector.gitcd Th3inspector/ chmod +x install.sh && ./install.shRecon Dog is a vulnerability Scanner. ReconDog has the following modules DNS Lookup, WHOIS lookup, GEO-Lookup, Subnet lookup, port scanner, Links extractor, etc. ReconDog can detect closed and open ports of networks. ReconDog is also called a complete package of Information gathering tools.
Installaion :
$ apt update && apt upgrade
$ apt install git
$ apt install python2
$ git clone https://github.com/UltimateHackers/ReconDog
$ cd ReconDog
$ chmod +x *
Usage :
$ python2 dog.py
Now select your option which you want..
- @Termux_For_Android
Installaion :
$ apt update && apt upgrade
$ apt install git
$ apt install python2
$ git clone https://github.com/UltimateHackers/ReconDog
$ cd ReconDog
$ chmod +x *
Usage :
$ python2 dog.py
Now select your option which you want..
- @Termux_For_Android
Termux Hackers (Users)
Word Gen is a wordlist generator tool. It's a simple python script to generate wordlist by typing few words.
Installation :
$
$
$
$
$
$
$
$
$
apt update && apt upgrade$
apt install git$
apt install python $
git clone https://github.com/vpphacker/wordgen.git$
cd wordgen$
chmod +x *$
sh install.sh $
python3 wordgen.pyInstallation :
$
$
$
$
$
$
$
$
$
Usage :
$
It shows all options of this tool
$
$
apt update && apt upgrade $
apt install git $
apt install python2 $
apt install python $
git clone https://github.com/ihebski/angryFuzzer $
cd angryFuzzer $
pip2 install -r requirements.txt $
pip2 install requests $
chmod +x * Usage :
$
python2 angryFuzzer.py -h It shows all options of this tool
$
python2 angryFuzzer.py -u http:site.comAndrobug framework is used to check the android apps vulnerabilities to find bugs in android application.
Execute these commands one by one to install.
Installation :
$
$
$
$
$
$
$
usage :
Now move your app to AndroBugs_Framework folder
for example :
mv app.apk /$HOME/AndroBugs_Framework/
$
above command is used to check app bugs..
app.apk = is your app name
result.txt = to store all information
It shows all bugs and vulnerabilities of your app
that's it
Execute these commands one by one to install.
Installation :
$
apt update $
apt upgrade $
apt install git $
apt install python2 $
git clone https://github.com/AndroBugs/AndroBugs_Framework $
cd AndroBugs_Framework $
chmod +x * usage :
Now move your app to AndroBugs_Framework folder
for example :
mv app.apk /$HOME/AndroBugs_Framework/
$
python2 androbugs.py -f app.apk -o result.txt above command is used to check app bugs..
app.apk = is your app name
result.txt = to store all information
It shows all bugs and vulnerabilities of your app
that's it
The Heartbleed Bug. The Heartbleed Bug is a serious vulnerability in the popular OpenSSL cryptographic software library. This weakness allows stealing the information protected, under normal conditions, by the SSL/TLS encryption used to secure the Internet.
The heart bleed bug is a serious vulnerability in
the popular Openssl port number 443. this weakness allows stealing
the information protected,under normal conditiond by
the SSL/Tls encryption used to
secure the internet.
Installation :
$ apt update && apt upgrade
$ apt install git
$ git clone https://github.com/TechnicalMujeeb/HeartBleed.git
$ cd HeartBleed
$ chmod +x *
$ ./install.sh
=> usage
run another script
$ ./hbleed
here enter you site to check bug
is present or not if present
then you can update your services and stay secure
The heart bleed bug is a serious vulnerability in
the popular Openssl port number 443. this weakness allows stealing
the information protected,under normal conditiond by
the SSL/Tls encryption used to
secure the internet.
Installation :
$ apt update && apt upgrade
$ apt install git
$ git clone https://github.com/TechnicalMujeeb/HeartBleed.git
$ cd HeartBleed
$ chmod +x *
$ ./install.sh
=> usage
run another script
$ ./hbleed
here enter you site to check bug
is present or not if present
then you can update your services and stay secure
This tool works on a technique that allows you to hack any Android camera. This tool hosts a fake website using ngrok and generate a link which we will send to the target.
When target click on our link, the fake website ask for camera permission. When the target allow it, Camera hacking tool get cam-shots of target device.
You can send this link to any Android user, but you can also send this link to any computer or laptop user. But as you know, every time a laptop camera is turned on, a small light comes on. Your target may know that your device's camera is turned on.
$ apt update
$ apt upgrade
$ pkg install git -y
$ pkg install wget -y
$ pkg install openssh
$ pkg install php
$ https://github.com/techchipnet/CamPhish.git
$ cd Camphish
$ chmod +x *
$ bash camphish.sh
When target click on our link, the fake website ask for camera permission. When the target allow it, Camera hacking tool get cam-shots of target device.
You can send this link to any Android user, but you can also send this link to any computer or laptop user. But as you know, every time a laptop camera is turned on, a small light comes on. Your target may know that your device's camera is turned on.
$ apt update
$ apt upgrade
$ pkg install git -y
$ pkg install wget -y
$ pkg install openssh
$ pkg install php
$ https://github.com/techchipnet/CamPhish.git
$ cd Camphish
$ chmod +x *
$ bash camphish.sh
IP-Info
Ip Info is a python script to scan ip address and give you results about target ip address. This script will help you to find victim region,country,date and time,city,ISP,Lat and Lon, zip code, time zone and AS. Tool works in both phones rooted and non rooted. Its work in Termux and Kali Linux. Specially design for Beginners.
$ apt update && apt upgrade
$ gitapt install git
$ apt install python
$ git clone http://github.com/vpphacker/vppbasic
$ cd ipinfo
$ chmod +x *
$ sh install.sh
$ python3 ipinfo.py
Now this tool will guide you
Ip Info is a python script to scan ip address and give you results about target ip address. This script will help you to find victim region,country,date and time,city,ISP,Lat and Lon, zip code, time zone and AS. Tool works in both phones rooted and non rooted. Its work in Termux and Kali Linux. Specially design for Beginners.
$ apt update && apt upgrade
$ gitapt install git
$ apt install python
$ git clone http://github.com/vpphacker/vppbasic
$ cd ipinfo
$ chmod +x *
$ sh install.sh
$ python3 ipinfo.py
Now this tool will guide you
Instagram Hacking Script By Bruteforce In Termux (Android)
1) Load up your android device.
2) Next click on your playstore app and search for “Termux” & install it.
3) Open Termux app and type: “pkg install git”.
4) To update available packages type: “pkg update”.
5) Lets install python by typing ” pkg install python”
6) We will need to download the tool we will be using for this bruteforce exercise. To download, on your terminal…type: “git clone https://github.com/avramit/instahack
7) Once the download is complete, type: “ls” to list the available folders/files in current directory
8) As you can see you have a folder call “instahack”, now make your way into that folder by typing “cd instahack”.
9) Type: “ls” to list the available files.
10) Ok we are nearly there. Next lets install an editor so we can edit the password file. To install nano, type : “pkg install nano” .
11) Ok lets stop for a second. Now allow me to explain a few things for the beginners. As the article said , this is a bruteforce method. So whats a bruteforce method? A bruteforce method is when the target credentials are ran against a list of possible passwords. The only thing about bruteforcing is that you are responsible for the strength of your own password list. Meaning the probability of cracking the password depends on the strength of the wordlist and the amount of possible words we put in. This will take time to build or you can use cupp.py to custom make a wordlist.
12) Fine so lets edit our password list. In instahack directory, type: ls.
13) As you can see there is a file named pass.txt. This is the file that you will need to place all the possible passwords in.
14) To edit the pass.txt, we will be using the nano editor that we just installed. Type: “nano pass.txt”.
15) Below you will see a small list of passwords that comes with it by default, you can now add as many words as possible for it to run against the target. You could use cupp.py to custom build password lists.
16)When you are done , press alt x, yes, enter. For those using samsung s8+ like myself, the alt button is replaced on ur phone as the volume down button. Press on to the volume down button and press x at the same time.
17) And now for the final installation, type : “pip install requests”.
18) We are ready!! Lets run the script, type: “python hackinsta.py” .
19) You will first be asked for your target username.
20) Next you will be given an option to use a proxy or not. I wont be using any for this tutorial
21) And lastly u can set the intervals between tries. I have set mine to 6.
22) Once you have it all keyed in, press enter.
23) As you can see upon enter, instahack starts running the pass.txt against the target username. If the password is incorrect it will show incorrect, otherwise as shown below, it will show the correct login credentials.
1) Load up your android device.
2) Next click on your playstore app and search for “Termux” & install it.
3) Open Termux app and type: “pkg install git”.
4) To update available packages type: “pkg update”.
5) Lets install python by typing ” pkg install python”
6) We will need to download the tool we will be using for this bruteforce exercise. To download, on your terminal…type: “git clone https://github.com/avramit/instahack
7) Once the download is complete, type: “ls” to list the available folders/files in current directory
8) As you can see you have a folder call “instahack”, now make your way into that folder by typing “cd instahack”.
9) Type: “ls” to list the available files.
10) Ok we are nearly there. Next lets install an editor so we can edit the password file. To install nano, type : “pkg install nano” .
11) Ok lets stop for a second. Now allow me to explain a few things for the beginners. As the article said , this is a bruteforce method. So whats a bruteforce method? A bruteforce method is when the target credentials are ran against a list of possible passwords. The only thing about bruteforcing is that you are responsible for the strength of your own password list. Meaning the probability of cracking the password depends on the strength of the wordlist and the amount of possible words we put in. This will take time to build or you can use cupp.py to custom make a wordlist.
12) Fine so lets edit our password list. In instahack directory, type: ls.
13) As you can see there is a file named pass.txt. This is the file that you will need to place all the possible passwords in.
14) To edit the pass.txt, we will be using the nano editor that we just installed. Type: “nano pass.txt”.
15) Below you will see a small list of passwords that comes with it by default, you can now add as many words as possible for it to run against the target. You could use cupp.py to custom build password lists.
16)When you are done , press alt x, yes, enter. For those using samsung s8+ like myself, the alt button is replaced on ur phone as the volume down button. Press on to the volume down button and press x at the same time.
17) And now for the final installation, type : “pip install requests”.
18) We are ready!! Lets run the script, type: “python hackinsta.py” .
19) You will first be asked for your target username.
20) Next you will be given an option to use a proxy or not. I wont be using any for this tutorial
21) And lastly u can set the intervals between tries. I have set mine to 6.
22) Once you have it all keyed in, press enter.
23) As you can see upon enter, instahack starts running the pass.txt against the target username. If the password is incorrect it will show incorrect, otherwise as shown below, it will show the correct login credentials.
Steal Pin Of Your Friend By Doing Pishing Attack From Your Mobile Phone
pkg install git
pkg install python2
git clone https://github.com/noob-hackers/hacklock
bash hashlock.sh
Successfully launched the tool.
Now, choose option 1. To steal your friend’s mobile pattern.
If the victim tries to provide his pattern on this page, this lock will send back to the hacker mobile with the pattern numbers
pkg install git
pkg install python2
git clone https://github.com/noob-hackers/hacklock
bash hashlock.sh
Successfully launched the tool.
Now, choose option 1. To steal your friend’s mobile pattern.
If the victim tries to provide his pattern on this page, this lock will send back to the hacker mobile with the pattern numbers
Goblin word Generator tool is used to generate password list easily..
Installtion :
apt update
apt upgrade
apt install git
apt install python
apt install python2
git clone https://github.com/UndeadSec/GoblinWordGenerator
cd GoblinWordGenerator
chmod +x *
usage :
python3 goblin.py
i want to generate list that length 4 to 6 then type here : 4:6 {hit enter}
Give name to your wordlist like, : pass.txt {hit enter}
and select option which you want and {hit enter}
it will generate a pass.txt
to open this file type this command :
cat pass.txt
Installtion :
apt update
apt upgrade
apt install git
apt install python
apt install python2
git clone https://github.com/UndeadSec/GoblinWordGenerator
cd GoblinWordGenerator
chmod +x *
usage :
python3 goblin.py
i want to generate list that length 4 to 6 then type here : 4:6 {hit enter}
Give name to your wordlist like, : pass.txt {hit enter}
and select option which you want and {hit enter}
it will generate a pass.txt
to open this file type this command :
cat pass.txt
How To Hack Web Cam With Just Url
[Using Saycheese]
➖➖➖➖➖➖➖➖➖➖➖➖Requirements:-
Termux Or Kali/Ubuntu
Step:-
Open Termux
pkg install git
git clone https://github.com/thelinuxchoice/saycheese
cd saycheese
chmod +x *
Run saycheese in termux.
./saycheese.sh
In kali linux you have to type bash ./saycheese.sh
Now type 2, and hit enter.
Copy the url and send it to the victim.(If url not generated then turn on hotspot and do again)
After victim opened the link, just type ctrl+c to stop the script
Type ls to locate the current working directry .
There will be a lot of png image. To move this image to gallary or sdcard, Just type mv file name /sdcard for example mv xyz.png /sdcard
➖➖➖➖➖➖➖➖➖➖➖➖
Share And Support Us👇
@Termux_Hacking_Commands
[Using Saycheese]
➖➖➖➖➖➖➖➖➖➖➖➖Requirements:-
Termux Or Kali/Ubuntu
Step:-
Open Termux
pkg install git
git clone https://github.com/thelinuxchoice/saycheese
cd saycheese
chmod +x *
Run saycheese in termux.
./saycheese.sh
In kali linux you have to type bash ./saycheese.sh
Now type 2, and hit enter.
Copy the url and send it to the victim.(If url not generated then turn on hotspot and do again)
After victim opened the link, just type ctrl+c to stop the script
Type ls to locate the current working directry .
There will be a lot of png image. To move this image to gallary or sdcard, Just type mv file name /sdcard for example mv xyz.png /sdcard
➖➖➖➖➖➖➖➖➖➖➖➖
Share And Support Us👇
@Termux_Hacking_Commands
NOTE: This Script does only work with the Termux Application for Android! PWN-Term is untested!
Installation:
$ pkg install git
$ git clone https://github.com/0n1cOn3/termux-wifi && cd termux-wifi
Setting Permissions to the executable file and run it:
$ chmod +rwx installer.sh &&
$ ./installer.sh
That it's.
I added fluxion for you so it will start into ubuntu if you try to hack wifi. Good luck
Installation:
$ pkg install git
$ git clone https://github.com/0n1cOn3/termux-wifi && cd termux-wifi
Setting Permissions to the executable file and run it:
$ chmod +rwx installer.sh &&
$ ./installer.sh
That it's.
I added fluxion for you so it will start into ubuntu if you try to hack wifi. Good luck