مجله تخصصی سیستم های حفاظتی,امنیتی ,کنترل دسترسی و هوشمندسازی
1.86K subscribers
5.66K photos
746 videos
1.14K files
2.88K links
فروش و نصب محصولات هایک ویژن، داهوا، برایتون، کلارنت، tplink - Dlink-Mikrotik - Paradox -
دزدگیر اماکن GMK, ZERO
نماینده رسمی پارس ارتباط

وب سایت :
https://hooshmandafzar.com

اینستاگرام:
https://www.instagram.com/hooshmand_cctv/

تلفن: 02691009293
Download Telegram
تنظیم تشخیص چهره در دوربین مداربسته هایک ویژن

نکته:

ابتدا تنظیمات vca باید در دوربین مداربسته پشتیبانی و فعال شود, آنگاه امکان تنظیم در nvr وجود دارد.

فهرست vca detection در زیر آمده است که در پست های آینده با نحوه کار و تنظیم آنها آشنا میشوید.

(تشخیص چهره، تشخیص خودرو، تشخیص عبور از خط و تشخیص نفوذ، تشخیص ورودی منطقه، منطقه خروج تشخیص، تشخیص و پرسه زدن، جمع آوری مردم
تشخیص، تشخیص حرکت سریع، تشخیص پارکینگ، تشخیص چمدان مراقبت، تشخیص حذف جسم، صوتی
تشخیص دست دادن استثنا، تغییر ناگهانی از تشخیص شدت صدا، و تشخیص فوکوس)


Face Recognition - تشخیص چهره

هدف:

تشخیص و ذخیره چهره افراد برای مقاصد حفاظتی و نظارتی


روش تنظیم:

1. رابط تنظیمات تشخیص چهره را وارد کنید.
منو> دوربین> VCA
2. جعبه علامت فعال کردن تشخیص چهره را فعال کنید.

3. دوربین مورد نظر را انتخاب کنید.
4. ذخیره را کلیک کنید.
https://telegram.me/cctvittech

مراحل:
1. رابط تنظیمات VCA را وارد کنید.
منو> دوربین> VCA
2. دوربین برای پیکربندی VCA را انتخاب کنید.
شما می توانید چک باکس از ذخیره VCA عکس کلیک کنید برای ذخیره تصاویر تشخیص چهره VCA.
3. نوع تشخیص VCA تشخیص چهره را انتخاب کنید.
4. فعال کردن چک باکس برای فعال کردن این تابع.
5. settings, تنظیمات مربوط به تشخیص حرکت
6. Rule Settings , تنظیم حساسیت تشخیص چهره

حساسیت: محدوده [1-5]. هرچه مقدار بیشتر باشد, تشخیص چهره راحتتر انجام میشود.


7. برای ذخیره Apply را فشار دهید.

مطالب و آموزش های تخصصی دوربین مداربسته هایک ویژن در لینک زیر:
https://goo.gl/mRTNRh
تنظیم تشخیص چهره در دوربین مداربسته هایک ویژن
نسخه جدید نرم افزار انتقال تصویر uniview

نرم افزار ezview مخصوص انتقال تصویر دوربین مداربسته uniview

https://telegram.me/cctvittech

Safe: data encryption, cell phone/e-mail registration, pin/gesture password and real-time alarm notification

Stable: add/manage/delete cloud devices, main/sub/third stream switch and multi-layer network address translation (NAT) traversal

Handy: quick add devices by scanning QR code, tap-drag live videos, gesture PTZ control and cellular/Wi-Fi data statistics

دانلود از لینک زیر :
https://goo.gl/3hjiTW
فعال سازی قابلیت Vehicle Detection یا تشخیص خودرو در هایک ویژن
معرفی:

قابلیت تشخیص پلاک و خودرو برای مقاصد نظارت بر جاده ها و ترافیک کاربرد دارد. امکان ذخیره تصویر صحنه و اعلام هشدار به مرکز فرماندهی و کنترل تنها بخشی از امکانات در دسترس هستند.


روش فعالسازی:

Steps:
1. Enter the VCA settings interface.
Menu> Camera> VCA

2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.

3. Select the VCA detection type to Vehicle Detection.

4. Check the Enable checkbox to enable this function.

5. Click to configure the trigger channel, arming schedule and linkage actions for the Blacklist, Whitelist and Others.

6. Click the Rule Settings to enter the rule settings interface. Configure the lane, upload picture and overlay content settings. Up to 4 lanes are selectable.

7. Click Save to save the settings.

https://telegram.me/cctvittech

نکته:

برای استفاده از تشخیص پلاک بهتر است از دوربین پلاک خوان استفاده کنید. این دوربین هم باید از قابلیت Vehicle Detection هم پشتیبانی کند.

مطالب آموزشی هایک ویژن در سایت زیر. حتما سر بزنید:
https://goo.gl/oGIyOL
قابلیت تشخیص عبور از خط Line Crossing Detection در دوربین مداربسته هایک ویژن
کاربرد:

برای تشخیص عبور افراد یا اشیا از خط و مرز مشخص کاربرد دارد. قابلیت تنظیم ورود یا خروج و تایین انواع آلارم ها هم برای ابزار وجود دارد.


روش فعالسازی :

1. Enter the VCA settings interface.
Menu> Camera> VCA

2. Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.

3. Select the VCA detection type to Line Crossing Detection.

4. Check the Enable checkbox to enable this function.

5. Click to configure the trigger channel, arming schedule and linkage actions for the line crossing detection alarm.

6. Click the Rule Settings button to set the line crossing detection rules.

https://telegram.me/cctvittech

1) Select the direction to A<->B, A->B or A<-B.
A<->B: Only the arrow on the B side shows; when an object going across the configured line with both
direction can be detected and alarms are triggered.
A->B: Only the object crossing the configured line from the A side to the B side can be detected.
B->A: Only the object crossing the configured line from the B side to the A side can be detected.

2) Click-and-drag the slider to set the detection sensitivity.
Sensitivity: Range [1-100]. The higher the value is, the more easily the detection alarm can be triggered.

3) Click-OK to save the rule settings and back to the line crossing detection settings interface.

7. Click 111 and set two points in the preview window to draw a virtual line.
You can use 222 the to clear the existing virtual line and re-draw it.

Up to 4 rules can be configured.

8. Click Apply to activate the settings.

آموزش های تخصصی دوربین مداربسته هایک ویژن در لینک زیر:
https://goo.gl/TqYAbY
16 و 32 کانال با خروجی 4k
Third-party network cameras supported
Up to 8 Megapixels resolution recording
Support 1-ch HDMI, 1-ch VGA, HMDI at up to 4K(3840x2160) resolution

https://telegram.me/cctvittech

32-ch network cameras can be connected with 256M incoming bandwidth
Up to 4 SATA interfaces
Support dual-os to ensure high reliablility of system running

Support various VCA detection alarm and VCA search

Support H.265/H.264/MPEG4 video formats

مشاهده دیتاشیت کامل دوربین در لینک زیر:
https://goo.gl/4VIURS
تشخیص نفوذ و ورود به منطقه در دوربین مداربسته هایک ویژن
کاربرد:

قابلیت Intrusion Detection برای تشخیص ورود افراد و اشیا به منطقه مشخص شده یا توقف آنها در منطقه کاربرد دارد.


روش تنظیم:

1. Enter the VCA settings interface.
Menu> Camera> VCA

2. Select the camera to configure the VCA.

You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.

3. Select the VCA detection type to Intrusion Detection.

4. Check the Enable checkbox to enable this function.

5. Click to configure the trigger channel, arming schedule and linkage actions for the line crossing
detection alarm.

6. Click the Rule Settings button to set the intrusion detection rules. Set the following parameters.
1) Threshold: Range [1s-10s], the threshold for the time of the object loitering in the region. When the
duration of the object in the defined detection area is longer than the set time, the alarm will be
triggered.
2) Click-and-drag the slider to set the detection sensitivity.
Sensitivity: Range [1-100]. The value of the sensitivity defines the size of the object which can trigger
the alarm. The higher the value is, the more easily the detection alarm can be triggered.
3) Percentage: Range [1-100]. Percentage defines the ratio of the in-region part of the object which can
trigger the alarm. For example, if the percentage is set as 50%, when the object enters the region and
occupies half of the whole region, the alarm is triggered.

intrusion-detection-role-setting

4) Click-OK to save the rule settings and back to the line crossing detection settings interface.

7. Click 111 and draw a quadrilateral in the preview window by specifying four vertexes of the detection region, and right click to complete drawing. Only one region can be configured.

You can use the 222 to clear the existing virtual line and re-draw it.

Up to 4 rules can be configured.

intrusion-detection

8. Click Apply to save the settings.

مطالب آموزشی بیشتر در لینک زیر:
https://goo.gl/2QmtOi
آموزش کامل تنظیمات انتقال تصویر هایک ویژن به روش ddns

روش ddns سرعت بالاتری نسبت p2p ارائه میدهد. این روش نیازی به خرید آی پی استاتیک ندارد و با ثبت نام در سایت ارائه دهنده سرویس و انجام تنظیمات می توانید از این امکانات استفاده کنید.
https://telegram.me/cctvittech

برای مشاهده آموزش به لینک زیر مراجعه کنید:
https://goo.gl/Qol0gc
آموزش تنظیم مودم و انتقال تصویر هایک ویژن

این فایل آموزشی به زبان انگلیسی ساده و روان مراحل تنظیم مودم و انتقال تصویر هایک ویژن را توضیح می دهد.

برای مشاهده آموزش به لینک زیر مراجعه کنید:

https://goo.gl/Vmdm0j
تشخیص ورود به منطقه خاص توسط دوربین مداربسته