⚠️ iBridgeOS 10.3 is no longer being signed by Apple. This means that downgrading or restoring to this versions via Apple Configurator is no longer possible , Version is unsigned now.

🛑 iCloud Bypass currently not supported Latest iBridgeOS 10.4

🚧 Let’s wait for the T2 Tools to release a fix for the recent Apple Patch affecting the T2 iCloud Bypass Service, for the new iBridgeOS version 10.4 & MacOS Tahoe 26.4/Sequoia 15.7.5/Sonoma 14.8.5 In the meantime, try to stay on the lowest version possible if you are already done with the iCloud Bypass on T2 Macs, and if you are going to bypass, then avoid restoring your Mac with Apple Configurator, as it will result in an update to iBridgeOS 10.4, which is not supported for the bypass at the moment.

❌ For already bypassed Macs, don't use OTA updates from settings, as it will directly update to Tahoe 26.4/Sequoia 15.7.5/Sonoma 14.8.5 which is not supported for bypass at the moment. For safe use, use OTA blockers to avoid mistakes or turn off Automatic Updates & Security Updates from the settings.

✅ Bypass Safe in iBridgeOS 10.3 & lower macOS Tahoe 26.3.2/Sequoia 15.7.4/Sonoma 14.8.4 and Ventura/Big Sur/Monterey/Catalina/Mojave/High Sierra.

💻👨‍💻 Untethered iCloud Bypass is still available till iBridgeOS 10.1 and lower & 10.2/10.3 Tethered Bypass.

Now, let's wait and see for future updates. I will keep you posted if any more information comes.

💻😉🎥  T2 Master V1.1 Tethered iBridgeOS 10.2 & 10.3 ( Battery Dead Not Lock Fixed) : https://youtu.be/R-K57xSrWbM

💻😉🎥 Untethered iCloud Bypass iBridgeOS 10.1 and lower Full Video Guide: https://youtu.be/cyfOgtsRZm0

💻😉🎥 Tethered iCloud Bypass T2 AIO Premium V2.1 iBridgeOS 10.2/ Full Video Guide : https://youtu.be/IB_8eKDJznc

How to use ?

- Restore device with latest firmware (recommended)
- Register device via serial number
- Activate the device with tool without connecting to Wi-Fi
    ~ done ✅

Hello Screen Setup (A12/A13)

Requirements

* USB MODULE for usbliter8
( Waveshare RP2350 USB-A / Waveshare RP2350 Zero /  Pimoroni TINY2350 / Raspberry Pi Pico 2 )

* Device with the latest supported iOS version.
* Replacement Serial number: HW0523D2Z3A

Procedure,

1. Connect the device to the tool and start the Hello service.
2. The tool will automatically reboot the device into Recovery Mode and begin the DFU process.
3. The tool will display the required serial number for Registration: (Send SN to your Favourite HFZ reseller or our HFZ Admin Team)
4. Launch USBLITER8 and use the Diagnostic function to install the new serial number.
5. Once the serial number has been written, return to the tool and start the Hello service again.
6. Wait for the activation process to complete. It usually takes around 1 minute and 30 seconds.
7. After the device reboot & already activated, click the Hello service one more time to complete the final configuration.
8. The tool will finish the process by applying the OTA Skip and Erase configuration.

( These final options can be configured through the Settings icon inside the tool )

🚀Software Benefits:
✅ Bypass your A12-A13 passcode locked / disabled Device with signal.
✅Extract Owner info.
✅iCloud Login
✅Reboot
✅App Store
✅Apple Pay
✅FaceTime
✅Notifications
✅OTA & Reset Block

🚀Supported Models🚀
- iPhone XS
- iPhone XS Max
- iPhone XR
- iPhone 11
- iPhon 11 Pro
- iPhone 11 Pro Max
- iPhone SE (2nd generation)
- iPad Air (3rd generation)
- iPad mini (5th generation)
- iPad (8th generation)
- iPad (9th generation) This model's support is currently on hold. We are trying to fix it in future updates, so stay tuned.

How to use ?

1. Connect the device in Recovery Mode
2. Run Precheck [this will detect the installed iOS version]
3. Make sure the device is on iOS 18 or iOS 26 [otherwise it is unsupported] , if lower iOS Update via 3utools first with ( Retain User's Data Option ) that will help you to update the ios version directly on Passcode/Disabled screen without going to hello screen mode.
4. Then Use DFU Helper
5. Put the device into DFU Mode
6. Run the exploit with usb module
7. Connect the device to the Mac
8. Boot the device
9. Backup Tickets
10. Do quick flash via 3utools or iTunes or factory rest [using tool]
11. Follow step 1-8
12. Restore Tickets
13. Reboot the devices and it's done.

Hardware Module Required Any:
• Waveshare RP2350 USB-A ( Best Recommended No soldering required )
• Waveshare RP2350 Zero ( Soldering Required )
• Pimoroni TINY2350 ( Soldering Required )
• Raspberry Pi Pico 2 ( Soldering Required )