यशोदा AI उपक्रम कोणी सुरू केला आहे?

A material has identical properties in all directions, it is said to be

Degree of kinematic indeterminacy of a pin jointed plane frame is given by

where j is number of joints and r is reaction components.

A doubly reinforced beam is considered less economical than a singly reinforced beam because

If the thickness of thinnest outside plate is 10 mm, then the maximum pitch of rivets in tension will be taken as

According to IS classification,the range of silt size particles is

The multiplying factor, as applied to obtain the maximum daily water demand,in relation to the avarage i.e per capita daily demand, is

The contribution compund of cement in decreasing order of rate of hydration are

When used in road work, the coefficient of hardness of a stone should be greater than:

What type of cross drainage work is provided when the canal runs below the drain, with FSL of canal well below the bed of the drain?

Which of the following expresses the height of rise or fall of a liquid in capillary tube?

Where, w- sp. Wt of the liquid Alpha - Angle of contact ag the liquid surface σ - surface tension

Which one of the following statements is correct?

Which one of the following aridity index (AI)?

Where, AET- Actual Evapotranspiration PET- potential Evapotranspiration

The following consecutive readings were taken with a dumpy level:

0.635, 1.525, 2.395, 0.605, 0.805, 0.125 The instrument was shifted after the third and fifth readings. The readings 2.395 and 0.635 respectively represents

The ideal form of curve for the summit curve is

slack time in PERT analysis