micro:bit is a pocket-sized computer 70 times smaller and 18 times faster than the original BBC Micro computers used in schools. It has 25 red LED lights that can flash messages and be used to create games.

For an Arduino user and want to try micro:bit, you can program your micro:bit using Arduino IDE

📝 Tutorial
https://tutorial.cytron.io/2019/05/08/program-your-microbit-using-arduino-ide/

🎥 Video
https://youtu.be/Vtonan4iHX8
━━━━━━━━━━━━━━━━━━━━━━

#Microbit
#Arduino
#ArduinoIDE

Last week we have discovered how to program the micro:bit using Arduino IDE

With the built-in Bluetooth on the micro:bit board, we will show you how to program and control micro:bit board using Adafruit Bluetooth app, called Bluefruit.

📝 Tutorial
https://tutorial.cytron.io/2019/05/15/control-your-microbit-using-adafruit-bluetooth-app/

🎥 Video
https://youtu.be/2Gug9WW-L-U
━━━━━━━━━━━━━━━━━━━━━━

#Microbit
#Arduino
#ArduinoIDE
#Bluetooth

Teensy 3.2 is a small, breadboard-friendly development board designed by Paul Stoffregen and PJRC. Teensy 3.2 brings a low-cost 32 bit ARM Cortex-M4 platform to hobbyists, students and engineers, using an adapted version of the Arduino IDE (Teensyduino).

This week, we will share with you how to get started with Teensy 3.2 using Arduino IDE.

📝 Tutorial
https://tutorial.cytron.io/2019/09/11/getting-started-with-teensy-using-arduino-ide/

🎥 Video
https://youtu.be/gIQSCksetg8
━━━━━━━━━━━━━━━━━━━━━━

#Arduino
#Teensy
#ArduinoIDE

It is easy to learn Arduino today. However some of the students don't have a computer or laptop for their study.

In this tutorial, we will show you how to program Arduino boards using Arduino IDE on Raspberry Pi. Yes, Raspberry Pi is an alternative for computer with low cost budget. It is suitable for learning purpose.

📝Tutorial
https://tutorial.cytron.io/2020/05/20/program-arduino-boards-using-arduino-ide-on-raspberry-pi

🎥 Video
https://youtu.be/M2Sh1ZG33Fw
━━━━━━━━━━━━━━━━━━━━━━

#RaspberryPi
#ArduinoIDE
#LinuxARM32Bits

Compared to the ESP32, ESP32-S2 latest chip from Espressif have extra I/O, USB-OTG, low power and more secure. As a maker (not a hacker), program it using an Arduino platform is easy. But until now, they still not provide an official support for Arduino IDE.

This video shows how to program ESP32-S2 WiFi module using Arduino IDE (unofficial).

📝Tutorial
https://tutorial.cytron.io/2020/06/25/program-esp32-s2-using-arduino-ide-unofficial

🎥 Video
https://youtu.be/gm1N437ng1Y
━━━━━━━━━━━━━━━━━━━━━━

#Arduino
#ESP32S2
#ArduinoIDE

Measure Distance With Maker Nano RP2040 And Ultrasonic Sensor With TFT Display

In this simple tutorial video, we shall see how to interface the Maker Nano RP2040 with HCSR04P ultrasonic sensor and 1.44" tft display. And ultimately measure and display the distance on the tft display.

🎥 Video
https://youtu.be/x7lrTwLWkS4


📝 Tutorial
And for more tutorial on the Maker Nano RP2040 please visit
https://tutorial.cytron.io/2022/03/11/measure-distance-with-maker-nano-rp2040-and-ultrasonicsensor-with-tftdisplay/


Hussien
Cytron technologies

#ArduinoIde#MakerNanoRP2040#HCSR04P#st7735#1.44TftDisplay

What Is The Air Quality Inside Your Room

In this tutorial today, we shall see how we can measure the air quality inside our room using the SGP30 sensor.

🎥 Video
https://youtu.be/Y1W8upjb7xQ


📝 Tutorial
And for more detail on this tutorial, please visit
https://tutorial.cytron.io/2022/03/21/what-is-the-air-quality-inside-your-room/


Hussien
Cytron technologies

#ArduinoIde #MakerNanoRP2040 #lcd16x2 #sgp30 #airquality #indoorairquality #grove #makernanobase

Monitor Soil Moisture With Maker Nano RP2040 And Maker Soil Moisture Sensor

In this tutorial we shall see how we can monitor the soil moisture using the Maker Nano RP2040 And Maker Soil Moisture Sensor. Together with this, we have integrated the Grove DHT11, Grove 16x2 LCD, and a Neopixel ring. All this are connected together using the Grove Shield for Arduino Nano.

🎥 Video
https://youtu.be/OsygV5DnvNo


📝 Tutorial
And for more detail on this tutorial, please visit
https://tutorial.cytron.io/2022/03/29/maker-nano-rp2040-with-maker-soil-moisture-sensor/


Hussien
Cytron technologies

#ArduinoIde #MakerNanoRP2040 #lcd16x2 #dht11 #airquality #indoorairquality #grove #makernanobase #neopixel #makersoilmoisturesensor

Gesture Control With Maker Nano RP2040 And APDS9960 Sensor

In this video, it is shown how to interface the Maker Nano RP2040 with APDS9960 to control the servo position based on the gesture

Video:
https://youtu.be/j21QHDZ8tD0

For detail tutorial, visit :
https://tutorial.cytron.io/2022/06/03/gesture-control-with-makernanorp2040-and-apds9960/

👨🏻‍💻👩🏻‍💻
Join our Telegram
Trust Me I'm A Maker https://t.me/trustmeimamaker

Hussien
Cytron Technologies

#raspberrypi #raspberrypirp2040 #rp2040 #apds9960 #gesturesensor #ArduinoIde

In this tutorial, it is demonstrated how to measure the ambient temperature with Raspberry Pi Pico and grove temperature sensor using Arduino IDE.

📖 For more detail about this tutorial please visit:
https://tutorial.cytron.io/2022/06/15/measure-ambient-temperature-with-raspberrypipico-and-grove-temperature-sensor-arduinoide/

🎥 Video
https://youtu.be/vkmxoPetpcw

Join our Telegram
Trust Me I'm A Maker https://t.me/trustmeimamaker

Hussien
Cytron Technologies

#raspberrypi #raspberrrypipico #arduino #arduinoide #ntctemperature #sensor #7segmentdisplay #GroveLCD

Measure Soil Moisture Using Raspberry Pi Pico And Maker Soil Moisture Sensor

In this tutorial we shall see how to measure the soil moisture using Raspberry Pi Pico and Maker Soil Moisture Sensor and display using the Sparkfun RGB LCD.

🎥 Video
https://youtu.be/roQAHG-Ao8M

📖 For more detail about this tutorial please visit:
https://tutorial.cytron.io/2022/06/25/measure-soil-moisture-using-raspberry-pipico-and-soil-moisture-sensor/

Join our Telegram
Trust Me I'm A Maker https://t.me/trustmeimamaker

Hussien
Cytron Technologies

#raspberrypi #raspberrrypipico #arduino #arduinoide #soilmoisture #sensor #rgblcd #groveport

Detect RGB Color With Raspberry Pi Pico

In this tutorial it is demonstrated how to detect the RGB color using Raspberry Pi Pico and APDS-9960 sensor. The result is then displayed on the Sparkfun RGB lcd.

🎥 Video
https://youtu.be/sYRMpNcWgvM

📖 For more detail about this tutorial please visit:
https://tutorial.cytron.io/2022/07/01/detect-rgb-color-with-raspberry-pipico/

Join our Telegram
Trust Me I'm A Maker https://t.me/trustmeimamaker
Trust Me, You Can 3D Print! https://t.me/trustme3dprint

Hussien
Cytron Technologies

#raspberrypi #raspberrrypipico #arduino #arduinoide # #rgblcd #APDS9960 #colorsensor

Measure Temperature Using PCT2075 And Maker Pi Pico

In this simple tutorial, it is demonstrated how to measure temperature using the PCT2075 and Maker Pi Pico and display the data on the Sparkfun RGB LCD.

🎥 Video
https://youtu.be/AhjHgMmqtTs

📖 For more detail about this tutorial please visit:
https://tutorial.cytron.io/2022/07/08/measure-temperature-using-pct2075-and-makerpipico/

👥Join our Telegram
Trust Me I'm A Maker https://t.me/trustmeimamaker


Hussien
Cytron Technologies

#raspberrypi #makerpipico #arduino #arduinoide # #rgblcd #PCT2075 #temperaturesensor #adafruit #stemmaqt

Getting Started | Cytron NodeMCU Starter Kit (Blynk)

In this tutorial, we'll show you how to get your Cytron NodeMCU Starter Kit set up with Blynk. Learn how to configure the Arduino IDE for the ESP8266, register for a Blynk account, and start creating loT projects with ease. Perfect for beginners looking to dive into the world of Internet of Things!

Tutorial: https://my.cytron.io/tutorial/get_start_with_nodemcu

#NodeMCU #Blynk #loT #ESP8266 #ArduinoIDE

Tutorial | Getting Started with Robo ESP32 🚀

Ready to dive into the exciting world of Robo ESP32? Our comprehensive guide will walk you through everything you need to know to kickstart your projects! Learn how to set up your board, master the Arduino IDE, and explore the visual programming wonders of MicroBlocks. 🤖 Let's build something amazing! ✨

🔗 Click HERE to learn more!

#RoboESP32 #ArduinoIDE #MicroBlocks #DIYElectronics #Robotics