Design of an ultra-low power and energy-efficient ternary Half-Adder using GNRFET technology
***
Published in International Journal of Circuit theory and Applications
***
Two revisions
***
Received: 7 November 2022
Accepted: 15 May 2023
***
Published in International Journal of Circuit theory and Applications
***
Two revisions
***
Received: 7 November 2022
Accepted: 15 May 2023
👍2
Three valued logic based multiplier circuit design using GNRFET and CNTFET Technologies
Arabian Journal for Science and Engineering (AJSE)
Submitted: 6 Feb. 2023
Accepted: 13 June 2023
No. of reviewers: 2
Revisions: 1 major
Arabian Journal for Science and Engineering (AJSE)
Submitted: 6 Feb. 2023
Accepted: 13 June 2023
No. of reviewers: 2
Revisions: 1 major
❤6
Efficient design of a ternary half adder using GNRFETs
Accepted for publication in AEU- International Journal of Electronics and communications
Submitted: 13 may 2023
Accepted: 30 June 2023
No. of reviewers: 2
Revisions: 1 minor
Accepted for publication in AEU- International Journal of Electronics and communications
Submitted: 13 may 2023
Accepted: 30 June 2023
No. of reviewers: 2
Revisions: 1 minor
❤4👍3
FinFET-based SRAM cell design with improved power and on-off current ratio
Accepted for publication in International Journal of Electronics
پروسه داوری طولانی (بیش از ۳ ماه برای تصمیم اولیه، بیش از ۱ ماه برای تصمیم بعد از ریوایز)
مدت زمان production check list بیش از ۱ ماه (با ارسال ایمیل به EiC)
Accepted for publication in International Journal of Electronics
پروسه داوری طولانی (بیش از ۳ ماه برای تصمیم اولیه، بیش از ۱ ماه برای تصمیم بعد از ریوایز)
مدت زمان production check list بیش از ۱ ماه (با ارسال ایمیل به EiC)
👍7
بدترین ژورنال برای ارسال مقالات:
Wireless Personal Communication
مدت زمان خیلی طولانی فرایند داوری
عدم پاسخگویی ادیتور و سردبیر
بهتر است آخرین گزینه شما برای ارسال مقاله باشد.
Wireless Personal Communication
مدت زمان خیلی طولانی فرایند داوری
عدم پاسخگویی ادیتور و سردبیر
بهتر است آخرین گزینه شما برای ارسال مقاله باشد.
👍6
اولین تجربه نگارش Book Chapter
(داشتن فرآیند طولانی)
https://www.routledge.com/Low-Power-Designs-in-Nanodevices-and-Circuits-for-Emerging-Applications/Birla-Kant-Dargar-Singh-Sivakumar/p/book/9781032412771
Chapter Title: A Highly Stable Reliable Ultralow-Power Design for 11T Near-Threshold FINFET SRAM
Chapter Title : One-Sided Schmitt-Trigger-Based 10T SRAM Cell with Expanded Read/Write Stabilities and Less Leakage Power Dissipation in 10-nm GNRFET Technology
(داشتن فرآیند طولانی)
https://www.routledge.com/Low-Power-Designs-in-Nanodevices-and-Circuits-for-Emerging-Applications/Birla-Kant-Dargar-Singh-Sivakumar/p/book/9781032412771
Chapter Title: A Highly Stable Reliable Ultralow-Power Design for 11T Near-Threshold FINFET SRAM
Chapter Title : One-Sided Schmitt-Trigger-Based 10T SRAM Cell with Expanded Read/Write Stabilities and Less Leakage Power Dissipation in 10-nm GNRFET Technology
Routledge & CRC Press
Low Power Designs in Nanodevices and Circuits for Emerging Applications
This reference textbook discusses low power designs for emerging applications. This book focuses on the research challenges associated with theory, design, and applications towards emerging Microelectronics and VLSI device design and developments, about low…
❤7
https://www.sci-hub.se/
Use this site to download research papers upto 2021.
https://scholar.google.com/
Use this site to download open access and few other research papers.
@geeko_nexus_bot
Use this telegram bot to download latest and old research papers for free.
@science_nexus_bot
Use this telegram bot to download latest and old research papers for free.
https://www.libgen.is/
This site is used to download ebooks for free.
https://annas-archive.org/
This site is also used to download ebooks for free.
Use this site to download research papers upto 2021.
https://scholar.google.com/
Use this site to download open access and few other research papers.
@geeko_nexus_bot
Use this telegram bot to download latest and old research papers for free.
@science_nexus_bot
Use this telegram bot to download latest and old research papers for free.
https://www.libgen.is/
This site is used to download ebooks for free.
https://annas-archive.org/
This site is also used to download ebooks for free.
👍8
Title:
Energy-Efficient High-Speed Dynamic Logic-based One-Trit Multiplier in CNTFET Technology
Journal:
https://www.sciencedirect.com/journal/aeu-international-journal-of-electronics-and-communications
IF=3.2 & Q2
Revisions:
1 major
Accepted for publication
Energy-Efficient High-Speed Dynamic Logic-based One-Trit Multiplier in CNTFET Technology
Journal:
https://www.sciencedirect.com/journal/aeu-international-journal-of-electronics-and-communications
IF=3.2 & Q2
Revisions:
1 major
Accepted for publication
👍8👏1
Ternary SRAM in GNRFET technology
International Journal of Electronics
Revisions:
1 Major
Accepted for publication
Time from submission to first decision after peer review:
Nearly 6 months
Time from resubmission (R1) to acceptance:
Nearly 2 months
International Journal of Electronics
Revisions:
1 Major
Accepted for publication
Time from submission to first decision after peer review:
Nearly 6 months
Time from resubmission (R1) to acceptance:
Nearly 2 months
❤9
CNTFET 7T SRAM cell
Physica Scripta
Revisions:
1 Major
Accepted for publication
Time from submission to first decision after peer review:
2.5 months
Time from resubmission (R1) to acceptance:
2.5 months
Physica Scripta
Revisions:
1 Major
Accepted for publication
Time from submission to first decision after peer review:
2.5 months
Time from resubmission (R1) to acceptance:
2.5 months
❤8
Title:
Tri-state GNRFET-based fast and energy-efficient ternary multiplier
Journal:
https://www.sciencedirect.com/journal/aeu-international-journal-of-electronics-and-communications
Accepted for publication
No. of reviewers: 2
No. of revisions: 1 (minor)
Time from submission to acceptance: 21 days
Tri-state GNRFET-based fast and energy-efficient ternary multiplier
Journal:
https://www.sciencedirect.com/journal/aeu-international-journal-of-electronics-and-communications
Accepted for publication
No. of reviewers: 2
No. of revisions: 1 (minor)
Time from submission to acceptance: 21 days
❤2👏2👍1
Title:
Ternary SRAM design using CNTFETs
Journal:
Physica Scripta (Q2 & IF=2.6)
Accepted for publication
No. of reviewers: 2
No. of revisions: 2 (Major revision and Moderate revision)- A large number of comments
Time from submission to acceptance: around 3.5 months
Ternary SRAM design using CNTFETs
Journal:
Physica Scripta (Q2 & IF=2.6)
Accepted for publication
No. of reviewers: 2
No. of revisions: 2 (Major revision and Moderate revision)- A large number of comments
Time from submission to acceptance: around 3.5 months
❤4👍4
Title : FinFET 9T-SRAM
Journal : Circuits, Systems, and Signal Processing https://link.springer.com/journal/34
Accepted for publication
No. of reviewers: 2
No. of revisions: 2 (Major revision and Minor revision)- A large number of comments
Time from submission to acceptance: around 7 months
Journal : Circuits, Systems, and Signal Processing https://link.springer.com/journal/34
Accepted for publication
No. of reviewers: 2
No. of revisions: 2 (Major revision and Minor revision)- A large number of comments
Time from submission to acceptance: around 7 months
SpringerLink
Circuits, Systems, and Signal Processing
Circuits, Systems, and Signal Processing publishes very-high-quality, peer-reviewed articles in circuit theory and practice, linear and nonlinear networks and ...
❤4👍3
If your manuscript for Physica Scripta (https://iopscience.iop.org/journal/1402-4896) includes figures or tables adapted from other published articles, you will need to obtain permission from the copyright holders.
Here's how the process works:
1. Acceptance: Once your manuscript is accepted for publication, Physica Scripta will send you an email regarding permissions.
2. Excel File: The email will include an Excel file for you to complete with information about the adapted figures and tables.
3. Required Information: The Excel file will likely request the following information for each adapted figure and table:
Cited Article: Full citation of the original article where the figure/table is published.
Access Link: A link to the original article (ideally a stable, permanent URL).
Publisher: The name of the publisher of the original article.
License: The type of license under which the original article is published (e.g., Creative Commons, Copyright, etc.).
Permission Status: Indicate if permission has been granted, is pending, or is not required.
Important Notes:
Obtain Permission: Always obtain permission before using figures or tables from other published articles, even if they are available under a Creative Commons license. It's important to follow the specific requirements of the license.
Accurate Information: Ensure all the information you provide in the Excel file is accurate and complete.
Contact the Publisher: If you have any questions or need assistance with the permission process, contact the Physica Scripta editorial office.
Here's how the process works:
1. Acceptance: Once your manuscript is accepted for publication, Physica Scripta will send you an email regarding permissions.
2. Excel File: The email will include an Excel file for you to complete with information about the adapted figures and tables.
3. Required Information: The Excel file will likely request the following information for each adapted figure and table:
Cited Article: Full citation of the original article where the figure/table is published.
Access Link: A link to the original article (ideally a stable, permanent URL).
Publisher: The name of the publisher of the original article.
License: The type of license under which the original article is published (e.g., Creative Commons, Copyright, etc.).
Permission Status: Indicate if permission has been granted, is pending, or is not required.
Important Notes:
Obtain Permission: Always obtain permission before using figures or tables from other published articles, even if they are available under a Creative Commons license. It's important to follow the specific requirements of the license.
Accurate Information: Ensure all the information you provide in the Excel file is accurate and complete.
Contact the Publisher: If you have any questions or need assistance with the permission process, contact the Physica Scripta editorial office.
👍2
Title: Ternary half-adder using GNRFETs
Journal: Materials Science & Engineering B
https://www.sciencedirect.com/journal/materials-science-and-engineering-b
Accepted for publication
Review Process Summary:
Reviewers: 2
Revisions: 2 (Major and Minor)
Review Comments: Easily addressed and manageable.
Time to Acceptance: Approximately 7 months, with the first review taking the most significant amount of time.
Journal: Materials Science & Engineering B
https://www.sciencedirect.com/journal/materials-science-and-engineering-b
Accepted for publication
Review Process Summary:
Reviewers: 2
Revisions: 2 (Major and Minor)
Review Comments: Easily addressed and manageable.
Time to Acceptance: Approximately 7 months, with the first review taking the most significant amount of time.
👍5
Title: MVL logic gates and arithmetic circuits using hybrid RRAM-CNTFET technology
Journal: Physica Scripta https://iopscience.iop.org/journal/1402-4896
Journal metrics: Q2 and IF=2.6
Accepted for publication
Review Process Summary:
Reviewers: 3
Revisions: 3 (Major, Moderate, and Minor)
Review comments: A large number of comments
Time to acceptance: 3 months
Journal: Physica Scripta https://iopscience.iop.org/journal/1402-4896
Journal metrics: Q2 and IF=2.6
Accepted for publication
Review Process Summary:
Reviewers: 3
Revisions: 3 (Major, Moderate, and Minor)
Review comments: A large number of comments
Time to acceptance: 3 months
👍3👏2
Title: 8T SRAM cell in CNTFET Technology
Journal: Physica Scripta https://iopscience.iop.org/journal/1402-4896
Journal metrics: Q2 and IF=2.6
Accepted for publication
Review Process Summary:
Reviewers: 2
Revisions: 1 (Moderate)
Review comments: easy & addressable
Time to acceptance: around 1.5 months
Journal: Physica Scripta https://iopscience.iop.org/journal/1402-4896
Journal metrics: Q2 and IF=2.6
Accepted for publication
Review Process Summary:
Reviewers: 2
Revisions: 1 (Moderate)
Review comments: easy & addressable
Time to acceptance: around 1.5 months
❤4👍3
Electronic Engineering
If your manuscript for Physica Scripta (https://iopscience.iop.org/journal/1402-4896) includes figures or tables adapted from other published articles, you will need to obtain permission from the copyright holders. Here's how the process works: 1. Acceptance:…
To avoid potential issues during the manuscript review processing, I recommend citing Tables and Figures in your manuscript using papers licensed under CC BY 4.0. This will ensure proper attribution and streamline the process.
👍4