Best Mesh Generation Software
1. Use the mesh generator which is being used by your friends who are available to help you out.
2.Best sotware in market is #ICEM (Hexa), but it is difficult to learn and takes alot time in mastering. Its tetra + prism version is very efficient and easy to use.
3. #Ansys_meshing is new technology and very easy to use.
4. #Gambit is very easy to learn and its tetra with boundary layer (in 3d implementing boundary layer often produces error) is very good. Its size functions are awesome and some of them are also implemented in ICEM CFD. So if this product is available in your lab then it is best idea to start with gambit.
5. #Gridgen is very good mesher and has technology of hexa, tetra and T-Rex (equalivalent for prisms). It produces very highly quality meshing. It has the capability to produce the hybrid meshes and which is its plus point as compared to ICEM. ICEM can produce the hybrid meshes, but it is cumbersome.
6. #T_grid is also very good unstructured mesher, but it requires surface mesh. It is mostly used in automotive industry. Tgrid has advantage of producing very large mesh (more than 40 million) in very short time and use very less computational resources. A desktop with 8 gb RAM and corei7 would be enough for this task.
7. You can use combination of different meshers. For example recently one of my freind used the Gambit and ICEM. They used Gambit for geometry cleaning (also reproduces some dirty parts) and tetra volume mesh. This mesh was saved in .msh format and imported into ICEM. Where with build topoogy underlying goemtry was reproduced and then prism mesh was extruded from the tetra mesh near to wall surface.
8. Some times people also use the ANSA for surface mesh and then either Tgrid or ICEM for volume mesh. Mostly for automotive meshing. ICEM is popular in aerospace, external analysis of automotive, turbo-machinery and any other complex geometry.
If you ask for my preference I would say:
1. For learning purpose start with Gambit or gridgen.
2. For hybrid mesh use Gridgen.
3. For high quality hexa meshes use ICEM CFD
4. For turbomachinery use turbogrid. But it is limited to predefined geometries.
5. Tgrid for very large unstructured meshes and very complex geometries.
For exact advise please tell us the following info:
a) Problem type and geometry. Please past some pics
b) which software(s) is (are) available to you.
@Fluent_CFD
1. Use the mesh generator which is being used by your friends who are available to help you out.
2.Best sotware in market is #ICEM (Hexa), but it is difficult to learn and takes alot time in mastering. Its tetra + prism version is very efficient and easy to use.
3. #Ansys_meshing is new technology and very easy to use.
4. #Gambit is very easy to learn and its tetra with boundary layer (in 3d implementing boundary layer often produces error) is very good. Its size functions are awesome and some of them are also implemented in ICEM CFD. So if this product is available in your lab then it is best idea to start with gambit.
5. #Gridgen is very good mesher and has technology of hexa, tetra and T-Rex (equalivalent for prisms). It produces very highly quality meshing. It has the capability to produce the hybrid meshes and which is its plus point as compared to ICEM. ICEM can produce the hybrid meshes, but it is cumbersome.
6. #T_grid is also very good unstructured mesher, but it requires surface mesh. It is mostly used in automotive industry. Tgrid has advantage of producing very large mesh (more than 40 million) in very short time and use very less computational resources. A desktop with 8 gb RAM and corei7 would be enough for this task.
7. You can use combination of different meshers. For example recently one of my freind used the Gambit and ICEM. They used Gambit for geometry cleaning (also reproduces some dirty parts) and tetra volume mesh. This mesh was saved in .msh format and imported into ICEM. Where with build topoogy underlying goemtry was reproduced and then prism mesh was extruded from the tetra mesh near to wall surface.
8. Some times people also use the ANSA for surface mesh and then either Tgrid or ICEM for volume mesh. Mostly for automotive meshing. ICEM is popular in aerospace, external analysis of automotive, turbo-machinery and any other complex geometry.
If you ask for my preference I would say:
1. For learning purpose start with Gambit or gridgen.
2. For hybrid mesh use Gridgen.
3. For high quality hexa meshes use ICEM CFD
4. For turbomachinery use turbogrid. But it is limited to predefined geometries.
5. Tgrid for very large unstructured meshes and very complex geometries.
For exact advise please tell us the following info:
a) Problem type and geometry. Please past some pics
b) which software(s) is (are) available to you.
@Fluent_CFD